Concrete cutting in Willmar MN - straight openings and cut lines where you need them
Need a doorway in a basement wall or a section of slab taken out? We cut straight, clean lines and keep the mess contained.
How do you cut concrete cleanly, and what goes into the price?
Concrete cutting in Willmar means sawing straight, controlled lines into concrete that's already in place, such as a door or window opening in a basement wall or a cut line across a slab, so you get a clean edge instead of a broken one.
I'm the owner of Willmar Concrete, and most cutting calls come from people who already have a plan, like a new window in a basement wall, a doorway into an addition, a trench across a garage floor for a drain line, or a cracked stretch of driveway that has to come out. In each case you want a straight edge right where you chose to put it, without cracking up the concrete around it.
The price moves with whether the cut is in a wall or a slab, how thick the concrete is and how much steel is inside it, how many feet of cut there are, and whether you want the pieces hauled away. The schedule mostly turns on whether the concrete needs a scan first and whether the work needs a permit, and the written estimate I give you lists each part of the job so you can see what you're paying for.
- Door and window openings cut into poured basement and foundation walls with a wall saw.
- Straight cut lines and trench lines across garage floors, driveways, patios and other slabs.
- Cuts placed to your plan, with clean edges left ready for whatever comes next.
What happens after you call us about concrete cutting?
I handle the first visit and the estimate myself, and our crew does the cutting. Here's how a job usually runs, from your first call to the walk-through at the end.
Call or send the form
Call (320) 419-1056 or use the form, and I'll set a time to come out and hear what you have in mind. It helps to have ready whether the cut is in a wall or a slab, its rough length in feet and whether you want the pieces hauled away.
I look and write it up
I look over the concrete, mark where the cuts would go and ask what sits behind or under it. You get a written estimate that lists each part of the job, so you can compare it line by line with any other quote.
Our crew makes the cuts
Once you're ready, we set a date, and if new concrete is going in afterward, we plan that pour around the ground and the forecast. Our crew does the cutting, and anything you asked us to haul off leaves with us.
We walk the finished job
I check the cuts on site and walk the finished work with you before we call it done. That's your time to point out anything you'd like to go over.
Photos of concrete sawing, wall openings and slab work
These are general photos of the trade, showing wall openings, slab cut lines and the slab work that often follows. They give you a sense of what clean, straight cuts look like before we talk about yours.
Concrete pool deck of gray rectangular pavers surrounds a swimming pool beside a lake, with glass fencing and white loungers.
Tiered stone-pattern concrete retaining walls frame planted garden beds and stairs.
Tiered concrete retaining walls of gray block hold landscaped mulch beds with succulents and shrubs on a hillside.
A freeform backyard pool is surrounded by a tan stamped concrete deck, with a slide, water feature and lounge chairs.
A curved concrete sidewalk leads through landscaped shrubs to the entrance of a brick house.
Stamped concrete patio with a curved gray border, fire table and red chairs beside a covered backyard porch and hot tub.
Get a written estimate for your concrete cut
We reply within one business day, and there's no pressure to book. Once you send the form, I'll set a time to come out, look at the concrete and write you a free estimate listing each part of the job.
(320) 419-1056Common questions about concrete cutting in Willmar
These are the questions I hear most when someone wants concrete cut. If yours isn't here, give us a call, and I'm glad to walk you through it.
How much does concrete cutting cost per foot?
Professional concrete saw cutting across the US usually costs about $4 to $25 per linear foot of cut, and that covers the sawing, not hauling the pieces away. Reinforced or deeper slabs cost more per foot than ordinary ones, wall sawing often runs higher still, and on a small job a minimum or trip charge can set the bill more than the per-foot rate. Your own figure comes on the written estimate once I've seen the concrete.
What is the best way to cut a door or window opening into a concrete wall?
Wall sawing is the standard way, because the saw rides on a rail bolted to the wall, so the opening comes out straight even when the cut runs sideways or overhead. A new opening changes the wall itself, so it's one of the jobs we check permit rules on first, as covered in the Willmar section below.
How do I get a round hole cut through concrete for a pipe or drain?
Round holes for pipes, drains, conduit and other mechanical lines are normally core drilled with a round bit that cuts a clean circle, rather than priced as ordinary saw cuts. If your job has a few of those along with straight cuts, mention them when you call so the estimate handles each one the right way.
Will the utility companies mark buried lines before a concrete cut in my yard?
Not all of them, because Gopher State One Call says some lines in a work area are private, and public utility companies won't mark those. If a trench cut goes down through an outdoor slab, tell me about anything you've had run underground, like a line to a shed or a sprinkler system, so we know what to look for.
Does a concrete cutting contractor need a license in Minnesota?
A contractor who works directly for the owner of a one- to four-unit home and does work in more than one special skill needs a residential building contractor or remodeler license from the state. Contractors offering a single specialty on homes without that license are covered by the state's contractor registration program instead. We're licensed and insured, and you can check any contractor with the Minnesota Department of Labor and Industry.
Is it safe to run a concrete saw inside my basement?
It can be when the air is handled, since the concrete sawing trade's spec calls for ventilation that meets OSHA standards, provided by the owner or the contractor, whenever a gas-powered saw cuts indoors. The same spec lists electric, hydraulic and air-powered saws as other choices for inside work, so it's fair to ask which saw the crew will bring.
Concrete cutting in Willmar, Litchfield and nearby cities
Minnesota's rules don't count opening a wall or cutting a load-bearing support as a permit-free repair, so before any wall-sawing job in Willmar or Litchfield, we check with the building official at the city or county and handle the permit and inspections when one applies. On homes around here, the calls are usually for basement walls, garage floors and driveway slabs, and we do the same work in the other cities nearby.